Histra Arches and Vaults

histra archi e volteHiStrA Arches and Vaults is a software dedicated to non linear analysis of vaulted structures and historical monumental buildings.

With HiStrA Arches and Vaults it is possible to easily and quickly model masonry structures with curved surface in space (such as vaults, domes, curved walls, etc.)

Using a comfortable wizard, you can model arches, vaults and domes, and single side of a building, with non-linear behavior.
You can also shape truss, generally used as structural reinforcement of historic buildings (depending on the type of element considered). You can also model reinforcement of arches and vaults with fiber-reinforced composite materials (FRP).
The type of material and additional geometric parameters (such as weight, characteristics of inertia, resistance properties) characterize each object and determine the structural behavior.

Software features

  • Various structure types
  • Data input wizard
  • Quick and easy modeling

HiStrA is the software for structural modeling and non-linear analysis of historical and monumental buildings.

HiStrA arches and vaults has wizards that allow you to quickly and easily define the geometry of the most common types of arches, vaults and domes. The input is parametric and is based on a reduced number of essential data, that are the geometric parameters of greatest importance for the chosen type.
 
 
It is possible to insert base piers with variable height and thickness on each edge or end of the structure.
 
When the wizard is closed, the three-dimensional model is generated, both in "geometric" and "computational" mode, ready for defining the additional aspects that complete the input phase, such as the customization of materials or acting loads.

It is also possible to model tie and chains, generally used in structural reinforcements of historic buildings (compatible with the type of element you consider) and to provide reinforcements by applying ribbons made of fibro-reinforced composite materials (carbon, glass, steel, etc.).
 

 

The type of material and other geometric parameters (such as thickness, characteristics of inertia, resistant properties) characterize each object, determining its structural behavior.

 

The response is shown in terms of pressure curve ...

collapse mechanism

stress and strain at each step of the analysis

 Geometric Model

The geometric model is immediately generated, thanks to the powerful wizard functionality. All its properties can be edited directly from the 3D environment of the software.

Computational model

The software generate automatically the computational model. They are generated geometric computational elements of solid type (quad).

Barrel Vault Input

It is possible to input barrel vaults with a rectangular plan shape, both with equal or different rise and ray with elliptic or parabolic shapes.
A linearly variable thickness can be defined between the base and the key zone of the vault. It is also possible to model the presence of the base piers with variable height, width and thickness; moreover, it is possible to locate openings in the piers.

volta a botte

It is possible to insert lateral ribbed arches: the thickness of this may be different from the vault. These can be created using the wizard steps and modified from the main program environment.

Reinforcing elements, such as rods, may be added consequently to the model, in the main input window.

Voult responce

The response is shown in terms of collapse  mechanism and stress and strain at each step of the analysis.

Output - load curves F-U and Cb-U

For each performed analysis shows the load curve Strength - Displacement, with reference to the control point. You can save output data in xls file.

 

Cross Vault Input

Cross vaults with both rectangular and irregular plans may be defined.
In the first case it is necessary to simply input the size of the two sides of the rectangle, while in the most generic case  the length of the four sides and the length of one of the diagonals must be set. The geometry is completed by means of the input of the rise with respect to the center point and the thickness law

The possibility to model ribbing arches along the perimeter and in correspondence of the diagonals, aligned to the extrados of the vault or in correspondence of the median surface, is also available.

Finally piers at the four vertices of the vault with generic width and height may also be considered.

Reinforcing elements such as truss may be also added to the model from the main input environment.

You can view the computational model of the vault in both extruded form and non extruded.

Voult responce

The response is shown in terms of pressure curve, collapse mechanism, stress and strain at each step of the analysis.

Domical Vault Input

Domical vaults on a rectangular plan are considered. The geometry is defined by assigning the plan size and the rise. The width of the base piers and the length of the perimetral arches may also be customize.

volta a vela

It`s possible to model the piers, with variable width and height, at the four vertices of the vault.

The thickness of the vault can be set linearly variable between the base and the key zone.

The thickness of the vault can be set linearly variable between the base and the key zone.

In the property panel on the right you can read the characteristics of the selected item.

The response is shown in terms of collapse mechanism, stress and strain at each step of the analysis.

Cloister Vault Input

Cloister vaults on rectangular plans are considered. The geometry is defined by assigning the plan size and the  maximum rise at the intersection of four fans. The thickness of the vault can be set linearly variable between the base and the key zone.

volta_a_padiglione

Perimeter walls with variable thickness and height may be considered; these walls can be then customized by considering rectangular openings.

In the 3D environment it is possible to input tie-beam by means of a completely generic way: for example, it is possible to input tie-beams at the base of the vault or in the top of the walls.


Voult responce

The response is shown in terms of pressure curve, collapse mechanism, stress and strain at each step of the analysis.

Input Roofed cloister vault

Roofed cloister vaults on rectangular plans may be considered. The geometry is assigned through the introduction of the plan size and the rise with respect to the base level. The thickness of the vault can be set linearly variable between the base and the key zone.

 VOLTA A SPECCHIO

Perimeter walls with variable thickness and height may be considered; these walls can be then customized by considering rectangular openings.

 Input Volta a Specchio

In the 3D environment it is possible to input tie-beam by means of a completely generic way: for example, it is possible to input tie-beams at the base of the vault or in the top of the walls.

The response is show in terms of  collapse mechanism, stress and strain at each step of the analysis.

Dome Vault Input

This wizard allows to model domes on circular or elliptical plans by defining the two main rays and its height.

cupola

A hole may be left at its top in order to consider the presence of a roof lantern. The hole is obtained by the intersection of the average surface area of the dome with a horizontal plane; therefore its radius is required.

cupola

The drums of the dome and that relative to the lantern may be considered, the latter also surmounted by a dome to complete the lantern. In both drums an arbitrary number of openings arranged radially along the perimeter of the vault, with generic width and height.

In the main environment mono-dimensional elements (with zero compressive strength) may be considered aiming at the simulation of reinforcing rings along the parallels of the dome.

The response is show in terms of collapse mechanism, stress and strain at each step of the analysis.

Fiber reinforcements Module

Fiber reinforcements module, allows you to model reinforcement of arches and vaults with fiber-reinforced composite materials (FRP).

It`s possible to apply the reinforcement both on the intrados, and on the extrados, of any curved surface.
The model allows you to capture both the broken fibers, the effect of delamination.
You can model FRP reinforcements in their real disposal.
HiStrA allows to evaluate, in an accurate, the effects of the reinforcements on the collapse mechanism and, therefore, on the overall strength of the structure.

Price List and offers

Listino prezzi e offerte

Configurazioni

Prezzo di Listino

Prezzo scontato

Noleggio Semestrale

H-Archi e Volte Base

€ 2.100

€ 1.750

€ 520

H-Archi e Volte

€ 2.990

€ 2.200

€ 740

Il modulo comprende tutte le funzionalità presenti nei moduli 3DM B, FP, GEO, RST, CFD senza alcuna limitazione

Acquisto : Prevede il diritto di utilizzo del software per un periodo di tempo illimitato, comprensivo dei servizi di assistenza tecnica e di aggiornamento per 1 anno.

Noleggio : Prevede l’utilizzo del software per un periodo pari a 6 mesi con possibilità di usufruire i servizi di assistenza e aggiornamento.

Moduli di HISTRA

H-B: Modulo base

H-RST: Rinforzi strutturali con Fibre, che consente di modellare rinforzi di archi e volte mediante applicazione di nastri in materiali compositi fibro-rinforzati (carbonio, vetro, acciaio, etc.).

I moduli aggiuntivi di HiStrA Archi e Volte (H-RST), si integra nel modulo base (H-B) quindi richiede obbligatoriamente il modulo H-B. Il software HiStrA Archi e Volte, ha un sistema di protezione informatica di tipo Software e viene rilasciato con un numero di installazioni pari a 1, abilitata alla stampa. Le installazioni sono in qualsiasi momento disattivabili da una
postazione e riattivabili in un’altra attraverso un tool informatico.

Tutti i prezzi di listino si intendono Iva (22%) esclusa e comprendono 12 mesi (dalla sottoscrizione del contratto) di manutenzione relativa ad adeguamenti legislativi, assistenza tecnica (telefonica e on-line),aggiornamenti del software durante il periodo di contratto. Il costo del canone annuale di manutenzione (al termine del primo anno dall'acquisto) pari al 15% del valore di listino del software

CONTATTACI PER UN PREVENTIVO PERSONALIZZATO

Information request

Please fill in the following form, our staff will answer as soon as possible to the email address you entered. Please specify which software you are referring to.

HiStrA FREE Download

Please fill in the form below and we will send you an email with the link to download the FREE version of the software and all the instructions to the email address you entered.

 

News, events and promotions