IDEA StatiCa Concrete

Reinforcement and code-check of all types of concrete walls, beams, and details according to the code, in minutes.

IDEA StatiCa Concrete is used by engineers dealing with members/details of concrete structures. Designing is based on internal forces model created either in IDEA StatiCa or imported from FEA programs like Midas, Axis VM, SCIA Engineer and others.

Complete design of concrete structural members and details. Cross-sections, beams, columns, frames, slabs, corbels. EN 1992-1-1, EN 1992-2 plus National Annexes, SIA 262. ULS/ SLS code checks. Non-linear deflections with long-term effects, 2nd order effects. Cross-section capacity – plain/ reinforced concrete. Flexure, shear, torsion, interaction of N, Vy, Vz, Mx, My, Mz, fatigue.

Software features

  • Complete design of structural members and details
  • Beams, columns, frames, slabs
  • General/ predefined cross-sectional shapes
  • Straight/ curved, prismatic/ tapered
  • Reinforcement layout in zones along member, predefined templates, DXF export
  • EN 1992-1-1, EN 1992-2 plus National Annexes, SIA 262
  • Comprehensive ULS/ SLS code checks
  • Non-linear deflections with long-term effects, 2nd order effects
  • Cross-section capacity – plain/ reinforced concrete
  • Flexure, shear, torsion, interaction of N, Vy, Vz, Mx, My, Mz, fatigue
  • Serviceability – stress limitations, crack width
  • Detailing
  • Response N-M-M, M-N kappa, short/ long-term stiffness
  • Corbel/ Bracket design using Strut & Tie method
  • BIM compliant – interface to various 3D FEA software

Top functionalities

Safely reinforce and check all types of concrete details and cross-sections

DESIGN OF WALLS, BEAMS, AND CROSS-SECTIONSDESIGN OF WALLS, BEAMS, AND CROSS-SECTIONS

IDEA StatiCa Concrete is a design software solution for all types of reinforced concrete cross-sections, beams, walls, diaphragms, frame joints, hangings, and brackets. It also provides code-checks of prestressed concrete members.

  • Design of simple as well as complex concrete details and cross-sections
  • Clear pass/fail results for any topology, based on global building codes
  • Dozens of ready-made templates, import from DXF
  • Complete ULS/SLS checks, including cracks

BIM LINKS TO ENHANCE YOUR PRODUCTIVITY

Idea_Concrete_BIM

SAFETY FIRST
Clear pass/fail checks. Complete reports. Design assumptions explained. Thousands of tests ensure your project is safe and ready to build so you can rest easy.

SAVE TIME
Save time designing and code-checking cross-sections and details. Any cross-section shapes, any topology of concrete details. Predefined topologies and reinforcement templates.

DESIGN CONFIDENCE
Quickly assess the buildability of details and cross-sections at any phase of a project. Sell your work for more, confidently.

LEVERAGE BIM
Import data from CAD or FEA applications. Synchronized assumptions adjust to reflect any changes made. Minimize errors.

UNIQUE METHOD AND ENGINE
Our section checks have been validated thoroughly by numerous comparison calculations. Together with university ETH in Zurich, we have also created and tested a method called Compatible Stress Field Method (CSFM) for the design of discontinuities.

concrete-lp-unique-new-method

  • Complete design of plain/ reinforced/ prestressed concrete cross-sections
  • General/ predefined cross-sectional shapes of beams, columns, one-way and two-way slabs, walls, deep beams
  • Predefined reinforcement templates/ general reinforcement layout, DXF export
  • Pre/ post tensioned/ composite concrete-concrete cross-sections
  • Prestressing loss due to elastic strain, long-term loses
  • EN 1992-1-1, EN 1992-2 plus National Annexes, SIA 262
  • Comprehensive ULS/ SLS code checks
  • Cross-section capacity in flexure, shear, torsion, interaction of N, Vy, Vz, Mx, My, Mz, fatigue Serviceability – stress limitations, crack width/ decompression condition, brittle failure
  • Detailing
  • Stress-strain response N-M-M, M-N kappa, short/ long-term stiffness
  • Quick sectional check and/or detailed analysis where necessary
  • Eurocode supportive – references to EN provisions, tooltips, explanations, warnings, error messages
  • Brief output overview or detailed protocol

sezioni c.a.

travi_in_calcestruzzo

  • Single span or continuous beam, cantilevers
  • Straight or curved in plane
  • Elevation in vertical plane
  • Standard or general cross-sections
  • Tapered beams in any span
  • Point, moment and line loads
  • Complete ULS and SLS combinations according to EN 1990
  • Design according to EN 1992-1-1, EN 1992-2, SIA 262
  • Reinforcement layout in zones along member, predefined templates
  • Complete ULS and SLS checks for zones and specific sections
  • Exact non-linear calculation of deflections with long term effects and cracks
  • Bill of material
  • 1xA4 or more detailed output report

This module of IDEA StatiCa Concrete focuses on reinforced concrete sections of structural members according to latest Eurocode 2, especially beams, columns, cantilevers, pad foundations, retaining walls and one-way slabs. Moreover, checks of compression members include influence of imperfections and second-order effects.

Beam/column offers large amount of predefined shapes of cross-sections and reinforcement templates

tipi di sezioni  in calcestruzzo

sezioni armate

Available are structural checks for Ultimate Limit State design (ULS) and Serviceability Limit State design (SLS) with option to determine the stiffness of cross-section for deflection analysis. Checks can be performed for both bridges and civil engineering structures. Moreover, detailed response of the cross-section for input internal forces is available as well as possibility to analyse the interaction of all internal forces including shear and torsion.

calcolo sezioni in cemento armato

Engineers can choose from quick sectional check and/or detailed analysis where necessary. Generic methods fully complying with Eurocode requirements are used. The assumptions used for the analysis are immediately visible on the screen. Any shape of cross-section, any reinforcement layout is possible. You get a complete set of checks according to Eurocode 2. IDEA StatiCa Concrete is exceptional in its clarity, presentation of intermediate results, references to EN code provisions, tooltips with graphical icons, explanations, warnings and error messages.

Load effects under your control

IDEA StatiCa Concrete is not just a program for designing and checking of cross-sections. It also allows you to sort out structural members into design groups and consecutively make the design for one representative member only. Contrary to complex software systems, you do not have to design all individual structural members. All critical reinforced cross-sections of all representative members you can assembled in one file. Each section can be loaded by appropriate number of combinations of internal forces and you get a complete set of results for each of them. Any number of sections can be referenced to one representative member (beam, one-way slab or compression member – column).

effetti dei carichi sotto controllo

This enables you to take into account internal forces which cannot be determined using regular structural model (due to accepted simplifications). You can adjust parameters of ceratin structural members to cover all effects neglected in structural analysis.

GUI gives you an instant overview of important properties and facts, offers high quality graphical outputs, tabular results. Navigator will guide you through your designing task step-by-step.

effetti dei carichi

The outputs are available as a brief overview or detailed protocol. Export into pdf and rtf format is available.

 

  • Column with one or two corbels
  • Free, fixed or flexible supports
  • Standard or general cross-sections of any shape
  • Forces and moments at the end or on corbels
  • Complete ULS a SLS combinations according to EN 1990
  • Design according to EN 1992-1-1, EN 1992-2, SIA 262
  • Reinforcement layout in zones along member, predefined templates
  • Complete ULS and SLS checks for zones and specific sections
  • Proper analysis of 2nd order effects
  • Overall interaction diagram
  • Bill of material
  • 1xA4 or more detailed output report

pilastri in c.a.

  • Plane frame or truss of arbitrary shape
  • Import of the shape from DXF
  • Standard or general cross-sections
  • Tapered beams and haunches
  • Point, moment, and line loads
  • Complete ULS a SLS combinations according to EN 1990
  • Design according to EN 1992-1-1, EN 1992-2, SIA 262
  • Reinforcement layout in zones along member, predefined templates
  • Complete ULS and SLS checks for zones and specific sections
  • Exact non-linear calculation of deflections  with long term effects and cracks
  • Proper analysis of 2nd order effects
  • Overall interaction diagram
  • Bill of material

telai in calcestruzzo

  • Slab of arbitrary shape
  • Openings, internal lines and points
  • Import of the shape from DXF
  • Point or line, fixed or flexible supports
  • Point, moment, and line loads
  • General plane loads
  • Complete ULS a SLS combinations according to EN 1990
  • Mesh generator, proper FE analysis
  • Design according to EN 1992-1-1, EN 1992-2, SIA 262
  • Predefined reinforcement templates
  • Complete ULS and SLS checks in points
  • Longitudinal and shear reinforcement, proper shear check
  • Calculation of cracks
  • Bill of material

piastre_in_cls

  • Comprehensive design of reinforced concrete corbels and brackets
  • Rectangular/ sloped shape of corbels/ brackets aligned symmetrically or to column edges
  • Prismatic column or reduced depth of column above the corbel
  • Variety of predefined reinforcement templates, automatic/ manual position
  • Primary reinforcement: plane looped/ space looped/ framing bars
  • Secondary reinforcement: vertical and/or horizontal stirrups
  • DXF export of real reinforcement cage
  • EN 1992-1-1 plus National Annexes, SIA 262
  • Comprehensive ULS code checks using Strut & Tie method
  • Strength of struts, ties, nodal zones
  • Detailing – vertical and horizontal stirrups, anchorage lengths, mandrel diameters
  • Quick check and/or detailed analysis if necessary
  • Eurocode supportive – references to EN provisions, tooltips, explanations, warnings, error messages
  • Brief output overview or detailed protocol

mensole in c.a.

Bracket / Corbel is used for structural design of concrete structure details. It is based on Strut & Tie method and provides a comprehensive checks according to Eurocode. It is sold as standalone program or as part of a more complete application "IDEA StatiCa Concrete"

Complete design and drawing of all the reinforcement.

You define dimensions of bracket/ corbel and appropriate load effects. The number of load cases (extreme effect) is not limited.

The program has a modern and easy-to-use interface.

progetto strutturale Mensole

Generic Loads: Another advantage of the application are the generic loads. The user can edit the size and position of the bearing surfaces, the eccentricity of force effects and can define any number of load cases.

carichi generici su mensole

REINFORCEMENT

Firstly, primary reinforcement  is applied – plane or space looped bars, framing bars. After that, secondary reinforcement is added – vertical or horizontal stirrups. Overall drawings are generated.

The bracket is reinforced with standard reinforcing elements. Clearly describe the resulting figures detail reinforcement.

There is also a 3D view of a reinforced Tops and detailed Drawing of individual items including anchor lengths.

You have everything you need to drawings.

armatura mensole

 3D view helps you to properly understand all the details. Automatic bill of material and counting/marking of elements.

La vista tridimensionale aiuta a capire correttamente tutti i dettagli.

Proper implementation of Strut & Tie method is based on Eurocode methodology. It was discussed and verified with various experts with practical experience.
Detailing check and brief or detailed report are also available .

verifica dei dettagli costruttivi

progetto mensole per pilastri

Shape types

forma mensole

User can see exactly how the model is created an how it works.

 

IDEA Prestressing è disponibile in varie modalità di acquisto, si può avere la licenza permanente con o senza canone di manutenzione, ma anche licenze temporanee trimestrali o annuali, comprensive di aggiornamenti. 

Contattaci per un'offerta personalizzata!

 

Listino prezzi

 PRODOTTO

 TIPO DI LICENZA

 PREZZO DI LISTINO

 IDEA Concrete Expert

 IDEA Concrete Enhanced

 IDEA Prestressing Expert

 IDEA Prestressing Enhanced

 Abbonamento trimestrale

370 € + iva

670 € + iva

890 € + iva

1190 € + iva

 IDEA Concrete Expert

 IDEA Concrete Enhanced

 IDEA Prestressing Expert

 IDEA Prestressing Enhanced

 Abbonamento trimestrale

 Licenza permanente

CONTATTACI PER UN'OFFERTA PERSONALIZZATA

La licenza è di tipo online e può essere utilizzata anche su più computer.

MANUTENZIONE ANNUALE - SERVIZIO DI AGGIORNAMENTO

È possibile acquistare il servizio di manutenzione: con il canone di manutenzione annuale pari al 18.5% del prezzo di listino della licenza, è possibile ricevere tutti gli aggiornamenti rilasciati durante l’anno e l'assistenza per 12 mesi (telefonica, via e-mail o in remoto).

Il rinnovo del canone di manutenzione è automatico, ma è possibile richiederne l’annullamento entro un mese dalla data del rinnovo (come indicato nell’EULA, par. 8.2.).

AGGIORNAMENTI SINGOLI

Gli aggiornamenti alla nuova versione costano il 20% del prezzo di listino corrente della licenza.

Contattaci per un preventivo personalizzato!

Information request

Please fill in the following form, our staff will answer as soon as possible to the email address you entered. Please specify which software you are referring to.

IDEA Statica FREE Download

Please fill in the form below and we will send you an email with the link to download the FREE version of the software and all the instructions to the email address you entered.

News, events and promotions